Hey, how come my 'arp -n' tells me my eth0 is "12.228.88.1" when my
ifconfig (which is the real IP) says "12.228.90.64"??
[dae51d=pts/0]11:[EMAIL PROTECTED]:{/home/dae51d/public_html/examples/dhcp}>
ifconfig
eth0 Link encap:Ethernet HWaddr 00:06:25:91:FF:C8
inet addr:12.228.90.64 Bcast:255.255.255.255
Mask:255.255.252.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:11724800 errors:0 dropped:0 overruns:0 frame:0
TX packets:2464495 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:2909486063 (2774.7 Mb) TX bytes:797368198 (760.4 Mb)
Interrupt:5 Base address:0xa000
eth1 Link encap:Ethernet HWaddr 00:D0:B7:83:16:A2
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1913154 errors:0 dropped:0 overruns:0 frame:0
TX packets:2250060 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:256301680 (244.4 Mb) TX bytes:2040670059 (1946.1 Mb)
Interrupt:11 Base address:0x8000
wlan0 Link encap:Ethernet HWaddr 00:02:6F:03:AE:00
inet addr:10.10.10.1 Bcast:10.10.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:303449 errors:0 dropped:343 overruns:0 frame:0
TX packets:431279 errors:421 dropped:857 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:23081995 (22.0 Mb) TX bytes:349882103 (333.6 Mb)
Interrupt:9 Base address:0x100
[dae51d=pts/0]11:[EMAIL PROTECTED]:{/home/dae51d/public_html/examples/dhcp}>
arp -n
Address HWtype HWaddress Flags Mask
Iface
192.168.1.6 ether 48:54:E8:26:23:38 C
eth1
10.10.10.69 ether 00:02:2D:3C:7C:FB C
wlan0
192.168.1.4 ether 00:A0:CC:E7:73:6E C
eth1
192.168.1.3 ether 00:80:45:31:D8:29 C
eth1
192.168.1.2 ether 00:10:5A:9C:5D:89 C
eth1
12.228.88.1 ether 00:09:12:86:48:54 C
eth0
192.168.1.19 ether 00:0B:AD:08:38:C3 C
eth1
192.168.1.18 ether 00:0B:AD:31:AA:A6 C
eth1
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
