I have
seen duplex mismatch cause this. Try mii-tool
or ethtool and check the settings on your card. Thanks, Rick Carroll Operations Engineer SocketWare 404-815-1998 ext. 23 [EMAIL PROTECTED] -----Original
Message----- We are
currently using RedHat 6.0 with a Rainbow card and our program is using RPC and
TCP, with some UDP for our transmission between Solaris 8 and RedHat 6.0.
We were able to transmit 1000 transaction in 5-sec using this
environment. I am trying to find out what changed or what do I need to
tweak to get the same rate on RedHat 7.3 or RedHat 8.0. With RedHat 7.3
or 8.0 it took 13-18 seconds to transmit the same 1000 transactions. What
has changed in these versions of the Operating Systems. I can
consistently get the numbers we need up to RedHat 7.0. I thought it was
the ethernet card, but it is the same one we used in the 6.0 and 7.0 systems,
3com 3c905b. I even downloaded the driver and installed it with not
success in changing the numbers. We even tried to tweak some of the TCP
parameters with no great improvement, the most we could shave off of the
numbers was 2-seconds. Or is
there some documentation I can read somewhere to find some answers. Lois E. Alston 5030 Sugarloaf Parkway [EMAIL PROTECTED]
|
- TCP/IP transmission problems Alston, Lois
- TCP/IP transmission problems Alston, Lois
- TCP/IP transmission problems Alston, Lois
- Re: TCP/IP transmission problems David Hollister
- RE: TCP/IP transmission problems Rick Carroll
- RE: TCP/IP transmission problems Alston, Lois