It sounds like you have an empty /etc/printcap file. I am just going out on a limb here, but have you tried configuring the printer? Try running printconf-gui from an X window shell. Then be sure to hit apply each time before testing it.
HTH, Matt ----- Original Message ----- From: "Kleiner Hampel" <[EMAIL PROTECTED]> To: "redhat-list" <[EMAIL PROTECTED]> Sent: Monday, March 03, 2003 1:01 PM Subject: Re: USB printer doesn't work > Am Son, 2003-03-02 um 00.50 schrieb Todd A. Jacobs: > > On 2 Mar 2003, Kleiner Hampel wrote: > > > > > usb.c: USB device 2 (vend/prod 0x4b8/0x1) is not claimed by any active > > > driver. > > > > This is telling you that there is no driver for your printer. Check the > > hardware compatibility guide, and then see if there's a module you need to > > load to manage that printer. > > > > -- > > "Of course I'm in shape! Round's a shape, isn't it?" > > Hello! > > I have the Epson Stylus Photo 750, it should work at least with redhat > 7.3. > i can see it with "lsusb" and in /proc/bus/usb/devices. > I have tried an other usb ports, too. > the module "printer" is loaded and the other "usb-modules", too. > > But "echo 1 > /dev/usb/lp0" should work at least!! > > Here is my "lpq output": > > [EMAIL PROTECTED] root]# lpq > Printer: [EMAIL PROTECTED] > Queue: no printable jobs in queue > Server: no server active > ... > > why is there no server aktive?? > > > Thanks for help > regards, > hampel > > > > > -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
