Hi all,
I have a dual monitor setup:
2GHz P4
ASUS P4B266
512MB DDR
Matrox Parhelia video card
Phillips 107P (Primary)
ViewSonic P95f+ (Secondary)
Red Hat 8.0 (2.4.18-24.8.0 kernel)
Here is my XF86Config:
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1" LeftOf "Screen 2"
Screen "Screen 2" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "Xinerama"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
Option "XkbCompat" ""
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "off"
EndSection
Section "Monitor"
Identifier "Philips"
ModelName "Philips 107P"
HorizSync 30.0 - 92.0
VertRefresh 50.0 - 160.0
EndSection
Section "Monitor"
Identifier "ViewSonic"
ModelName "ViewSonic P95f+"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 160.0
EndSection
Section "Device"
Identifier "MGA CARD 1"
Driver "mtx"
BoardName "Parhelia 512d"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "MGA CARD 2"
Driver "mtx"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen 1"
Device "MGA CARD 1"
Monitor "Philips"
DefaultFbbpp 32
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen 2"
Device "MGA CARD 2"
Monitor "ViewSonic"
DefaultFbbpp 32
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
How do I tell Gnone to not split windows across the two screens? I'd like the
window to appear int he center of the active window or at least just the
Primary screen.
Thanks,
Steven
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
