On Tue, 2003-02-25 at 00:15, santosh kumar wrote: > Hi , > > Recently i loaded redhat 7.2. The m/c has 3 NIC cards but while > installing OS, I configured one NIC with required IP parameters and its > started working fine for 2-3 mins, after that suddenly it is stopped > working without any errors. If I restart the service > /etc/init.d/network its starting without any error, i checked errors in > /var/log/messages, nothing is there. Can any one give there valuable > suggestions for the same, is it problem with IRQ conflict?? >
I had a problem with a nic that kept changing its ipaddress. I had configured the box at install with dhcp and then after testing on the test lan I put it on the production lan with a static ip. Drove me crazy until I found that restarting the network did not kill dhcpcd. Turned out that dhcp was renewing the lease and changing the ip address when it did so. killed dhcpcd and all is well. A reboot would have fixed it, so that may not be your problem, Bret -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
