On Fri, 7 Feb 2003, John Aldrich wrote:

> I've got a SCSI CDRW (Yamaha CRW 4416) and I have been unable to get it to
> work with any version of RedHat since the kernel that came with RedHat 7.1.
> I'm now on RedHat 8.0. It just gives me a "device unavailable" error when I
> try to actually burn something. Yesterday it let me blank a CDRW disk, but
> when I tried it again later yesterday it failed.

I've had problems, a while back, that sound similar....

The problem was that I was running the automount daemon.  This plays havoc
with burning CDs.

Ed

>
> Unfortunately the people on the "cdrecord" list aren't very friendly in
> general and the author of CDRECORD specifically said "ask RedHat."
>
> I'm using the latest versions of both CDRECORD and XCDRoast and I'm still
> unable to burn.
>
> I have something of a debug log from the output that was displayed in the
> XCDRoast window. I'm inserting it below. If you have any ideas on how to get
> this CDRW which is listed as working under CDRECORD, I'd really appreciate
> it!
>
> BTW, I almost forgot... I upgraded the firmware on the CDRW last night to
> 1.0j, which is the last one that has been released for this drive (Released
> in 2000.) I also heard a nasty rumor that Yamaha is no longer going to make
> CDRW drives so I don't hold out much hope for a newer firmware.
>
>
> Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev=0,6,0 gracetime=2
> fs=4096k  -v -useinfo speed=1 -dummy -eject -pad -audio "/stuff/track-01.wav"
> ...
>
> scsidev: '0,6,0'
> scsibus: 0 target: 6 lun: 0
> Linux sg driver version: 3.1.24
> pregap1: -1
> TOC Type: 0 = CD-DA
> Using libscg version 'schily-0.7'
> atapi: 0
> Device type    : Removable CD-ROM
> Version        : 2
> Response Format: 2
> Capabilities   : SYNC
> Vendor_info    : 'YAMAHA  '
> Identifikation : 'CRW4416S        '
> Revision       : '1.0h'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags   : MMC SWABAUDIO
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
> Drive buf size : 1566432 = 1529 KB
> FIFO size      : 4194304 = 4096 KB
> Track 01: audio   39 MB (03:56.93) no preemp scms
> Track 02: audio   49 MB (04:52.02) no preemp scms
> Track 03: audio   47 MB (04:43.86) no preemp scms
> Track 04: audio   33 MB (03:20.44) no preemp scms
> Track 05: audio   40 MB (03:59.56) no preemp scms
> Track 06: audio   36 MB (03:34.24) no preemp scms
> Track 07: audio   39 MB (03:53.09) no preemp scms
> Track 08: audio   42 MB (04:11.06) no preemp scms
> Track 09: audio   35 MB (03:31.13) no preemp scms
> Track 10: audio   38 MB (03:50.66) no preemp scms
> Track 11: audio   59 MB (05:53.86) no preemp scms
> Track 12: audio   37 MB (03:45.73) no preemp scms
> Total size:      503 MB (49:54.62) = 224597 sectors
> Lout start:      504 MB (49:56/47) = 224597 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 6
> Is not unrestricted
> Is not erasable
> Disk sub type: Medium Type C, low Beta category (C-) (6)
> ATIP start of lead in:  -11231 (97:32/19)
> ATIP start of lead out: 359847 (79:59/72)
> Disk type:    Short strategy type (Phthalocyanine or similar)
>
> Manuf. index: 27
> Manufacturer: Prodisc Technology Inc.
> Blocks total: 359847 Blocks current: 359847 Blocks remaining: 135250
> Starting to write CD/DVD at speed 1 in dummy TAO mode for single session.
> Waiting for reader process to fill input buffer ...
> input buffer ready.
> Starting new track at sector: 0
>
> Track 01: Total bytes read/written: 41795040/41795040 (17770 sectors).
> Starting new track at sector: 0
> cdrecord: Input/output error. write_g1: scsi sendcmd: no error
> CDB:  2A 00 00 00 00 1B 00 00 1B 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 14.117s timeout 40s
> Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
>
> write track data: error after 63504 bytes
> Writing  time:  295.071s
> Average write speed  10.2x.
> Min drive buffer fill was 99%
> Fixating...
> WARNING: Some drives don't like fixation in dummy mode.
> Fixating time:    0.006s
> cdrecord: fifo had 724 puts and 661 gets.
> cdrecord: fifo was 0 times empty and 647 times full, min fill was 95%.
> ?
>
>
>
>

-- 
http://www.shorewall.net/  for all your firewall needs



-- 
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to