I am running Red Hat 7.3 on my PC. I have three LAN ports (one on the mother board (eth1) and the other two on NICs (eth0 & eth2)). I can only activate the LAN port on one of the NICs. I cannot activate the other two LAN ports. Whenever I try I get a failure. Can somebody help me with diagnosing this problem? Your help is very much appreciated. I see the following messages in "/var/log/messages" file. ------------------ Feb 5 16:50:52 DEVWS2 network: Bringing up interface eth0: succeeded Feb 5 16:50:57 DEVWS2 kernel: PCI: Found IRQ 11 for device 00:04.0 Feb 5 16:50:52 DEVWS2 ifup: SIOCGIFFLAGS: No such device Feb 5 16:50:57 DEVWS2 kernel: eth1: Unknown PHY transceiver found at address 1. Feb 5 16:50:52 DEVWS2 ifup: Failed to bring up eth2. Feb 5 16:50:57 DEVWS2 kernel: eth1: Using transceiver found at address 1 as default Feb 5 16:50:52 DEVWS2 network: Bringing up interface eth1: failed Feb 5 16:50:57 DEVWS2 kernel: eth1: SiS 900 PCI Fast Ethernet at 0xcc00, IRQ 11, 00:0a:e6:36:c6:61. Feb 5 16:50:53 DEVWS2 ifup: Determining IP information for eth2... Feb 5 16:50:53 DEVWS2 dhcpcd[924]: dhcpStart: ioctl SIOCGIFHWADDR: No such device Feb 5 16:50:53 DEVWS2 ifup: failed. Feb 5 16:50:53 DEVWS2 network: Bringing up interface eth2: failed ----------------------------------------
Your help is very much appreciated. Thanks in advance Srini -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
