This is an internel modem right?
First go into your bios and disable your com ports.
Try removing the call to isapnptools during bootup.
Then watch what the serial info is on bootup (or use 'dmesg' to see it after).
Here's my output with a mouse on Com1/ttyS0 and a 33.6 internel modem on
com4/ttyS3
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty03 at 0x02e8 (irq = 3) is a 16550A
See if it sees your internel modem without isapnptools.
Dan
At 07:15 AM 3/22/98 -0500, Ed Jackson wrote:
>Hello all.........
> I'm running redhat 5.0, and can't get my Aztech MD6800-U (pnp)
>modem to work. I can hear the modem turn on when trying to dial, but
>it won't initialize. The string seems ok, as far as I can tell, and I
>have installed isapnptools.Has anyone else had luck getting one of
>these to work??
>Later. ed.
>
>
>--
> PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
>http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
> To unsubscribe: mail [EMAIL PROTECTED] with
> "unsubscribe" as the Subject.
>
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
