I have a 2940UW w/1.25 BIOS. It works fine with the hard drive (Seagate
Barracuda), but when I switched the CDROM from IDE to SCSI (Toshiba 12X), I
can no longer mount the CD. The error message is "the iso9660 file system
is not supported by the kernel." (prior to the switch, I recompiled the
kernel with SCSI support for hard drives and CDROM and support for IDE
CD...the kernel compiled cleanly and worked fine prior to installation of
the SCSI CD.) In addition to not being able to mount the file system, I
have attempted to recompile the kernel but the new kernel will not boot...I
get a kernel panic when it probes the CD.
I checked the FAQ and I understand that the 2940UW is only partially
supported. I do have initiate wide negotiation in the SCSI BIOS settings
for the CD disabled. I do have enable SCSI speed enabled too. The later
may be where the problem is.
Any help or suggestions will be appreciated.
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
