> The most info I've found is that the modem is set to not automatically
> pick-up. This is good. I've confirmed by moving it around on uugetty that it
> is reading my uugetty.ttyS0 file. This is also good. As per the debug info,
Correct, getty should issue an `ata' to answer the phone..
> immidately initiates a connection. It's almost as if it's ignoring my
> RINGBACK settings, and it doesn't state a darn thing about RINGBACK in the
> debug file (as if maybe there was a typo, etc.) I grabbed the SRPM and did a
Did it produce other debugging information?
> manual unpack of the tar ball and recompiled with the default Makefile. There
> were a *lot* of warnings about pointers, but eventually the thing compiled...
> moving uugetty in place of the existing binary proved to behave the same way.
Try the following:
sunsite.unc.edu/pub/Linux/system/serial/getty/getty_ps-2.0.7j.tar.gz
and see if you have better results. You can go thru the code if
necessary..
Dave
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
