Svante Signell wrote:
>
> Urgent!!
>
> The new kernels provided by RH, eg 2.4.16 series does _not_ boot on my
> HW!! Which driver is named aic7xxx.o now, the old one or the new? My
> guess is the new one. There is also s module aic7xxx_mod.o, what is that?
>
> Additionally, the new driver has serious speed problems: on another
> box with aic7895 on-board driver, hdparm -t /dev/sda gives: 19.6MB/sec
> with the old driver and only half with the new.
>
> lspci -v:
> 00:0a.0 SCSI storage controller: Adaptec AIC-7881U (rev 01)
> Subsystem: Adaptec AHA-2940UW SCSI Host Adapter
> Flags: bus master, medium devsel, latency 64, IRQ 9
> I/O ports at e800 [size=256]
> Memory at ec001000 (32-bit, non-prefetchable) [size=4K]
> Expansion ROM at ea000000 [disabled] [size=64K]
What kernel did you switch from because I've been having nothing
but trouble with the aic7xxx module since 2.4.2.
Here's what "lspci -v" has to say about it --
00:0a.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
Subsystem: Adaptec AHA-2904/Integrated AIC-7850
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at a800 [size=256]
Memory at db001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 1
--
Julianne Frances Haugh Life is either a daring adventure
[EMAIL PROTECTED] or nothing at all.
-- Helen Keller
_______________________________________________
Redhat-devel-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-devel-list
