I’ve seen GFCI have all sorts of weird issues. Not enough data to put the blame on the inverter. 
I’d try different  big load or move the device to a different outlet and see what it does. 

Good luck

On Jun 5, 2026, at 9:19 AM, Drake Chamberlin via RE-wrenches <[email protected]> wrote:



I called EG4 tech support about this question. They said to use a commercial grade, 20 A GFCI receptacle. 

My question is: "isn't a 15 and 20 A GFCI electronically the same? Isn't the only difference in the faceplate?"

Thank you,

Drake 

---
 

Drake Chamberlin

Athens Electric LLC

Ohio Electrical Contractor’s License 44810

NABCEP Certified PV Installation Professional

On 2026-06-04 11:40, Drake Chamberlin via RE-wrenches wrote:

A commercial grade, Hubble GFCI receptacle is nuisance tripping on an EG4 XP6000 inverter. It holds fine on an LED light bulb. Under a heavy load (PVC Heater), it trips after a minute or so.
 
Is there a GFCI receptacle brand that works better with the XP6000 inverter?
 
Thank you,
 
Drake 
 
 

Drake Chamberlin

Athens Electric LLC

Ohio Electrical Contractor’s License 44810

NABCEP Certified PV Installation Professional

 

--
 

_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to