I've been using one of these for years for 2V cell maint - adjustable from 0 to 36V, and the display of current and volts is useful. https://testequipment.center/Products/GW-Instek-PSH-3630A
Kevin -----Original Message----- From: RE-wrenches <[email protected]> On Behalf Of Jay via RE-wrenches Sent: August-24-25 2:25 PM To: RE-wrenches <[email protected]> Cc: Jay <[email protected]> Subject: [RE-wrenches] Charger for 2v cell Any recommendations for a charger to charge up a 2v lead acid 1100 amp hr battery? Needs to actually be 2.5-3v Thanks in advance Jay _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
