I’ll give that some thought. It’s too steep and narrow but it’s not too far to the road which maybe I could just pull them with the nearby tractor and a long rope.
thanks > On Jul 17, 2025, at 1:38 PM, david quattro <[email protected]> wrote: > > If it’s not too steep you can continually leapfrog two or 3 pieces of > plywood, and roll your engine dolly on that. Or you can use a few cuts of > large diameter pipe as rollers. > > > > On Thu, Jul 17, 2025 at 3:33 PM jay via RE-wrenches > <[email protected] > <mailto:[email protected]>> wrote: >> I was out at the job site today with the customer with the old SI 4548. >> It’s going away, primarily because she wants a mini split and her inverter >> is too small at this point. >> >> She has of course a abosolyte battery, 6 cells per stack. >> I don’t know if they will slide out or not. >> >> But just thought I’d ask if anyone has any tricks. >> Oh and no it’s in a side room, no way to get any heavy equipment in there, >> and each stack is about 600# >> >> Maybe I could get an engine hoist in there, but outside the door is dirt and >> gravel and its a long ways to where I can put the trailer. >> I am anticipating having to remove the cells to deal with it. >> Cutting it apart with a right angle grinder is about the only trick I know. >> But I’m guessing there are others. >> >> Fortunately I can install the new equipment on the other wall so I don’t >> need to get the batteries out quickly. >> >> thanks in advance >> >> jay >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> <http://re-wrenches.org/> >> >> List Address: [email protected] >> <mailto:[email protected]> >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/[email protected]/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org <http://www.members.re-wrenches.org/> >>
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
