Jay, Zonna has MATE 3s now but not sure if anything else . On Sat, Apr 19, 2025 at 8:27 AM Jay via RE-wrenches < [email protected]> wrote:
> Does the new OB have product now? > > Jay > > > > On Apr 18, 2025, at 6:34 PM, MDElectricSolar via RE-wrenches < > [email protected]> wrote: > > You could swap it out with a FM-80 and do 4 strings of two modules in > series. > > Michael D Nelson > MD Electric & Solar, Inc. > 707-684-0064 mobile > 707-884-1862 office > www.mdelectricsolar.com > www.facebook.com/mdelectricandsolar > > > On Apr 18, 2025, at 6:40 AM, Christopher Warfel via RE-wrenches < > [email protected]> wrote: > > > > Hi Jason, I have the same set up. These are the array and cc breakers. > Although we are having a power outage right now, the DC shunt is doing its > usual crazy reading from time to time. Chris > > > <2b1DSIMNoJXo0FJ2.jpg> > > On 4/18/2025 8:35 AM, Jason Szumlanski via RE-wrenches wrote: > > Hi all, > > I have a client that wants to replace a PV array that is aging and > hurricane damaged. It's a rather old array of unknown rating connected to a > MX60 via a Flexware 500 DC enclosure (48V). > > I'm planning to install eight REC 450 Alpha Pure RX in series. I'm going > to need a 600 volt charge controller. I'm considering a Midnite Hawk's Bay > unless someone has a better idea. > > The customer sent me this crude image. I can see the two inverter breakers > on the right. I am wondering what the two breakers on the left are. I'm > thinking one of these is an 80 amp breaker for the output of the MX60. The > other one is probably a PV input breaker of unknown rating. I would need to > change these to accommodate the new charge controller. The Midnite Hawk's > Bay 90 requires a 125A output breaker. Does anyone know if there is an > Outback breaker of this physical size and 125A rating to plug into this DC > FlexWare enclosure? For the PV input, I should be able to get whatever > breaker is required for this single string of PV. > > I'm all ears if there is an easier way to go about this with approximately > 3,600W of new PV. > > Thanks in advance! > > Jason Szumlanski > Florida Solar Design Group > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & > settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other:https://www.mail-archive.com/[email protected]/http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette:http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios:http://www.members.re-wrenches.org > > -- > Christopher Warfel, PE > ENTECH Engineering, Inc. > PO Box 871, Block Island, RI 02807 > (401) 447-5773 > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
