Those part numbers indicate an item from between 2003 and 2008 from AEE. I don't remember what they are though, and do not see those items codes in any old AEE catalogs. Besides Schneider, Magnum also sold similar breakers in 70A and 100A I think. You could probably source them from a breaker distributor but at much higher cost.
Brad Bassett On Tue, Mar 11, 2025 at 11:21 AM Mick Abraham via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Hello, Mechanics~ > > I sold this early GFI for PV arrays to a homeowner decades ago. Page 2-5 > of the attachment mentions a custom enclosure from AEE Solar; AEE part > number 53.0090 and breaker mounting plate 53-0094. > I'm sure that's probably what I bought for mounting the GFP assembly. The > breaker plate is pre punched to fit the mounting tabs on back of these CF > style breakers. This may also be known as an E-series breaker. > > I suspect this box was a joint project involving Dave Katz & Robin Gudgel. > Now I need to add a suitable single pole DC breaker but all I have found so > far are those with terminal studs that poke out out the back of the > breaker. Two different eBay vendors had a photo that looked right but the > product they shipped had the studs. I'm sure the breaker is non-custom but > I haven't found an easy source for quantity one. > > I think the breaker body is 1" wide. Ideal specs would be 100 amp rated, > and any voltage rating above 50. 80 amp rating would probably also work. > It's for a 24v battery off grid setup. If anyone has a part they could sell > to me, please reply off-list with a description of the age & condition, & > requested prepayment including slow boat shipping to the SLC region, Utah. > > OR: if anyone could suggest a vendor who's likely to have this, all > suggestions would be welcomed. Thanks in advance; the Wrench List is the > Bomb~ > > Mick Abraham, Proprietor > www.abrahamsolar.com > > Cell phone or for text messaging: 970-946-6584 > ᐧ > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
