Hi all, Is anyone willing to share with me a picture or two of the Powerflo5 in a stack configuration? I'm curious about best practices for battery cable routing to busbars.
Regarding the Powerflo16, the manual says it must be wall/floor mounted with some of the weight supported by the floor, and not supported by the wall alone. But there is a diagram showing vertical separation requirements between batteries. I'm confused... Can these be wall mounted or not? Thanks, Jason Szumlanski Florida Solar Design Group
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
