HI Wrenches, I have an off grid site on an Island on auto pilot for the winter with no access. The FM 100 has remained in Silent mode even when the Array Voltage is around 150 Volts and battery at 46V I did get a response from Outback Tech support but they couldn't figure out what happened. I suspect that there is a ground or arc fault error which locks it up til manually recycled. The problem is that there is no indication found on Optics that there is a ground fault. We would be totally in the dark except the original small solar array with an Apollo CC with about a kilowatt of solar has been dribbling in enough power to keep above low battery cutoff for a few hours each day. The system was up when I was on the tech support call but has since quit for the day. Has anyone seen this before?
John Blittersdorf
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
