Good afternoon Jay, 16 KWH's when full, appears that my first two shipped at 34-50% SOC.
Enjoy your evening, Nick On Sun, Nov 10, 2024 at 10:44 AM Jay via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > How many kWh of battery do you have. > > Jay > > > > On Nov 10, 2024, at 11:00 AM, Nick Lucchese via RE-wrenches < > re-wrenches@lists.re-wrenches.org> wrote: > > > Thanks Logan, Tyrone and Maverick, > > Yes I've tried all the things noted so far without any success. Since > there is no PV nor controller at the moment I can't test with just a > controller alone but after testing with the Rosie I'm quite certain the > battery is just fine. Also to be clear, the Mate3s never really boots up, > only briefly starts with the dancing lights as the power modules on top of > the inverter makes the attempt to start the fans up. > > I'll test with a fresh out of the box Radian and Powerflo16 then report > back what I find. It's got to be one or two of the power modules in the > Radian. Had a similar multiple trip repair on one about 9 months ago and > even (old) Outback had it being the last component(s) to replace. > > For those of you that did have success getting warranty parts of Outback, > was it by email that you got a response or the 360-435-6030 number? > > Hope you all are having a relaxing Sunday, Nick > > > On Sat, Nov 9, 2024 at 1:25 PM William Bryce via RE-wrenches < > re-wrenches@lists.re-wrenches.org> wrote: > >> Hi Nick >> >> There are PF16's running open loop with Radians. The PF16 has a precharge >> built in. The key is to have the inverter breaker closed, then close the >> battery breaker. After that push the BMS power button (3-4 seconds the >> display will power up) and the battery will slowly ramp up and do a >> precharge before fully starting. >> >> Reach out to me off the list and I can help you more if the "new" radian >> does not work. >> >> Thanks >> Logan >> >> >> >> >> >> On Sat, Nov 9, 2024 at 3:41 PM Nick Lucchese via RE-wrenches < >> re-wrenches@lists.re-wrenches.org> wrote: >> >>> Greetings Wrenches, >>> >>> Wondering if any of you have successfully paired the new Powerflo16 with >>> a GS8048-A yet? There is no reason it shouldn't work yet I've >>> unsuccessfully been to a customer's site three times now without a fix. The >>> Radian setup had been in use with an FLA Trojan pack for years till their >>> demise due to the client unknowingly turned off the AC input source to keep >>> them charged for his backup system lacking PV. Network is too far away >>> therefore I didn't have Optics otherwise I would have caught it. Have not >>> ruled out that there may have been another fault with the Radian before all >>> this but the AC input seemed most logical and was known to be turned off by >>> accident previously. >>> >>> Upon closing the Powerflo battery breaker to inverter the Mate3s lights >>> up momentarily while briefly receiving full voltage but then DC voltage >>> sinks to around 2-18vdc then either trips the breaker on the Powerflo16 or >>> lights up the fault indicator. Spoke with Midnite support and they >>> recommended a workaround to the BMS pre-charge boot up process but that >>> didn't resolve the issue either. I originally thought it must be a failed >>> Spare215 power supply board but after swapping there was no effect. Next >>> return trip I brought a Rosie with me and everything powered up just fine >>> so I then figured it would be the Spare 204 board stack but had the same >>> exact effect when I tried that swap today. My next step is returning to >>> swap the Spare-205 power control modules but first I'm going to unbox >>> another Powerflo16 at my shop and pair it with a brand new Radian that has >>> not yet been cannibalized. I've installed 42 Radians and only had two with >>> failed Spare-205 control modules but each time it was a similar outcome >>> with them being the last thing I swapped to success. >>> >>> I'm thinking it must be a failed Spare-205 but since the Powerflo >>> has only been shipping for a couple months I just wanted to run this by the >>> group to see how many have successfully paired these two components at this >>> point. The Radian is still under warranty but that seems pretty meaningless >>> at this point. One way or another this job is going to be a loss at this >>> point but oddly still having fun working through a new head scratcher. >>> >>> Thanks for any insight, Nick >>> >>> _______________________________________________ >>> List sponsored by Redwood Alliance >>> >>> Pay optional member dues here: http://re-wrenches.org >>> >>> List Address: RE-wrenches@lists.re-wrenches.org >>> >>> Change listserver email address & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> There are two list archives for searching. When one doesn't work, try >>> the other: >>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >>> >>> List rules & etiquette: >>> http://www.re-wrenches.org/etiquette.htm >>> >>> Check out or update participant bios: >>> http://www.members.re-wrenches.org >>> >>> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
