You could connect the Mate to the FM 100, but not the inverters. Screen, no  comms.

Ray

On 11/8/2024 2:28 PM, Chris Sparadeo via RE-wrenches wrote:
Hi Jay,

This is a new issue, but I don’t believe it’s generator related. Without CC comms plugged in, generator is steadily charging. It was serviced recently and has solid voltage and frequency under load. I am all for leaving the comms disconnected, but unfortunately there is no screen on the FM 100, so PV output wouldn’t be visible.


On Fri, Nov 8, 2024 at 4:14 PM jay via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:

    Hi Chris,

    Is this new or has it been always like this?

    jay







    > On Nov 8, 2024, at 1:42 PM, Chris Sparadeo via RE-wrenches
    <re-wrenches@lists.re-wrenches.org> wrote:
    >
    > Hey wrenchers,
    >
    > I have an off-grid customer with a pair of VFX 3648 inverters, a
    FM 100 charge controller and two eVault classics in open loop. The
    issue is when the generator is charging the batteries, incoming
    amperage is all over the place and periodically, gradually drops
    to 0A then ramps back up. This is creating really long generator
    run times. When I turn off PV input, same results. When I turn off
    both PV input and charge controller output (turning off the CC
    entirely) the inverters hold a steady charge. If I remove the
    charge controllers comms cable from the hub, they both play nicely
    and charge cooperatively. This obviously sounds like a
    communication issue, but unfortunately, without the help of OB
    tech support, I am left speculating. I have checked all settings
    with a fine comb and nothing looks to be out of place.  Has anyone
    experienced something similar to this?
    >
    > Thanks!
    >
    > Chris Sparadeo
    >
    > _______________________________________________
    > List sponsored by Redwood Alliance
    >
    > Pay optional member dues here: http://re-wrenches.org
    >
    > List Address: RE-wrenches@lists.re-wrenches.org
    >
    > Change listserver email address & settings:
    > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
    >
    > There are two list archives for searching. When one doesn't
    work, try the other:
    > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
    > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
    >
    > List rules & etiquette:
    > http://www.re-wrenches.org/etiquette.htm
    >
    > Check out or update participant bios:
    > http://www.members.re-wrenches.org
    >

    _______________________________________________
    List sponsored by Redwood Alliance

    Pay optional member dues here: http://re-wrenches.org

    List Address: RE-wrenches@lists.re-wrenches.org

    Change listserver email address & settings:
    http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

    There are two list archives for searching. When one doesn't work,
    try the other:
    https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
    http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

    List rules & etiquette:
    http://www.re-wrenches.org/etiquette.htm

    Check out or update participant bios:
    http://www.members.re-wrenches.org


_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here:http://re-wrenches.org

List Address:RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to