Will new Unirac hardware work with old rails?
We are putting new modules on a building that was re-roofed. It doesn't
seem worthwhile to reinstall an array of 167 W modules with extensive
squirrel damage to the leads. The array went up at least 12 years ago.
The old rails are fine, but we don't want to deal with Weeb clips, which
are not supposed to be reused anyway. The old module frames are 1.8
inches thick so the clamps need to be replaced.
Are the new rails functionally different from the old ones?
Thank you,
Drake
_Drake Chamberlin_
_Athens Electric LLC_
_Ohio Electrical Contractor's License 44810_
_NABCEP Certified PV Installation Professional_
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
