Hi Jerry

What equipment are you using to pull steel  from that depth?

Jay 

On May 26, 2024, at 3:18 PM, Jerry Shafer via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:


Hey wrenches
Water leaks in wells, I just pulled my well pump out at a mere 390 feet, older galvanized 11/4 « steel, where the Water rose and dropped the pipe was is poor shape, not leaking yet but it will l suggest if the pump is pul l Ed then replace it with well pipe either sch 80 or 120 depending on the depth. 
Fun times

On Sun, May 26, 2024, 11:14 AM Darryl Thayer via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:
I had a similar pipe leak. I forgot how I located it, but I used a vaccumn 
gauge or pump and to determine how far down the well the the leak was 
and pulled the pump and pipe and found a crack.

On Sat, May 25, 2024 at 8:41 PM Bradley Bassett via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:
I have a water system with a Grundfos SQFlex SQF3-2 pump. I'm getting water flow in reverse either through the pump or a leak up to the pump. My question is if the check valve on the top of the pump is not sealing, will the progressive cavity pump allow water to flow through the pump in reverse? I'd think that with a positive displacement pump it would not, except very slowly or if it turned the motor backwards which I think would be very unlikely. There is about 100 psi head on  the pump. 

I think it's most likely I have a leak somewhere in the plumbing, and of course another failed check valve farther up in the plumbing. It's possible to get failures even with redundant protection if you have two concurrent failures, which I must have here. 

Brad Bassett 
Old time solar guy who used to do solar pumping back in the '80's and '90's. Mostly retired now.


_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to