I once got a trophy company to engrave some plaques and it was stupid
expensive. ($50/ plaque) Then I started using PV Labels.com, and their
pricing is quite reasonable (under $10/ plaque). Turn around time has
always been quick too. I'd have to be printing a lot of plaques for
doing it in house to pencil out. I'm not sure if it ever would,
considering that you still have to pay yourself or someone else to
operate the engraver, and the blank plaques probably cost a bit too.
Ray Walters
Remote Solar
On 3/30/2024 12:56 PM, Lou Russo via RE-wrenches wrote:
Aloha Wrenches,
Anyone out there making their own engraved plaques and labels?
If so, is it worth it and what machine are you using?
Thanks for your time and insight, it is always appreciated.
Aloha,
Lou Russo
Owner
l...@spreesolarsystems.com
808 345 6762
Spree Solar Systems LLC
CT-34322
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here:http://re-wrenches.org
List Address:RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
