I use a Morningstar relay driver and 48 VDC relays to drop loads as the
battery voltage drops. It works fine, and avoids the necessity of
complex electronics.
Drake
_Drake Chamberlin_
_Athens Electric LLC_
_Ohio Electrical Contractor's License 44810_
_NABCEP Certified PV Installation Professional_
---
On 2023-12-14 21:36, Howie Michaelson via RE-wrenches wrote:
Hi all,
I am trying to figure out best options to control loads in a Sol-Ark15k battery backup residential system. It's been quite a few years since I've set up an automatic load control, and never with a Sol-Ark. The Sol-Ark will output to the main breaker panel, so no separate "backed up" panel - all house loads will likely be on the Sol-Ark's load side.
What do folks like to use in this type of circumstance to automatically shed loads when the grid is down, either sequentially as the battery bank drops down or more simply triggered by loss of grid? Are they pieces of equipment that work specifically with the Sol-Ark?
I'd also be open to considering Fortress's Envy, if there is an option that would work well specifically with it.
I'm interested in the range of options from simple to complicated, as long as it is automated. All automated ideas/options appreciated.
Thanks!
Howie Michaelson
Sun Catcher
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
