That's about what to expect from the Psuedo Sine Wave that the SWs put out.  They shortened the list of problem appliances significantly compared to "mod sine", but its a stepped pyramid wave.  Later inverters (Outback, Magnum) were step waves too, but just more steps, which translates to less trouble.

Trace SW waveform


I have cured the "washer not running on the SW" once, by adding a capacitor to the circuit.  I can't recommend it 100% from a safety stand point, but it worked for us. Some body else chime in on the possible dangers?  Cap blowing, fires, shorts?  Definitely needs to be in a metal enclosure.

I think its either get a different washer or get a different inverter. At 22+ years, its slowly reaching the time to retire those old SWs.

Ray Walters
Remote Solar
303 505-8760

On 9/8/23 2:53 PM, Dave Angelini Offgrid Solar via RE-wrenches wrote:
I would do a load test on the inverter. It may have a damaged FET or two. They do not last forever! Good Luck *Dave Angelini Offgrid Solar "we go where powerlines don't" <http://members.sti.net/offgridsolar/>https://offgridsolar1.com/ <https://offgridsolar1.com/><http://members.sti.net/offgridsolar/> e-mail offgridso...@sti.net text 209 813 0060*


On 2023-09-08 12:30 pm, Darryl Thayer via RE-wrenches wrote:

New washing machines are small loads 400 Watts about.

On Fri, Sep 8, 2023, 2:27 PM Darryl Thayer <darylsol...@gmail.com> wrote:

    I once used a ferro-resonant transformer to clean up a sine
    wave.  You have to know the power.

    On Fri, Sep 8, 2023, 1:59 PM Chris Daum via RE-wrenches
    <re-wrenches@lists.re-wrenches.org> wrote:

        Hi folks:

        I have a fellow with a Trace SW5548, purchased from us in
        2001.It's been workinggreat for him all this time, but the
        dilemma is he's gotten a new Hotpoint washing machine, and
        its electronics don't like the old inverter.Is there some
        sort of power conditioner or 'line tamer' available that will
        work for this appliance's operation?Any ideas would be
        greatly appreciated.He's rather loathe to replace his
        inverter if he doesn't need to.

        Best,

        Chris Daum

        Oasis Montana Inc.

        406-777-4309 or 4321

        406-777-4309 fax

        www.oasismontana.com <http://www.oasismontana.com/>

        _______________________________________________
        List sponsored by Redwood Alliance

        Pay optional member dues here: http://re-wrenches.org

        List Address: RE-wrenches@lists.re-wrenches.org

        Change listserver email address & settings:
        http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

        There are two list archives for searching. When one doesn't
        work, try the other:
        https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
        http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

        List rules & etiquette:
        http://www.re-wrenches.org/etiquette.htm

        Check out or update participant bios:
        http://www.members.re-wrenches.org


_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org


_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here:http://re-wrenches.org

List Address:RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to