Jason In plenty of applications l will use couplers with chase nipples, height is one issue but installed working height is very important. I use a 8"x8"x X gutter and sometimes even off set that from the wall, l have had AHJ not want to see mixed cables LVDC and AC in the same conduit so pass through the battery conductors right out the bottom and to the battery. I just create a template for punching into the gutter, looks clean and is safe with easy access to the display Fun times
On Wed, Aug 2, 2023, 8:04 AM Jason Szumlanski via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > I see a lot of pictures with conduit nipples coming out of a gutter that > are fairly long. I have a height limit issue and I'm wondering if there are > any negative implications of using very short nipples between a wireway > below and the inverter. I'm thinking about using close nipples or perhaps > 2-in nipples if I have enough room. > > If there are any practical reasons that this will not work well, please > let me know. > > Jason Szumlanski > Florida Solar Design Group > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
