| I had the same experience as the older post you referenced with these mods on 2 MW system. Lots of burn marks and shattered glass, located at the edges of cells. And under thermal imaging there were clearly lots of issues, including ones that hadn’t (yet) manifested themselves to the naked eye. The mods were quite concave - a straight edge across the short side showed almost a half inch of concavity. I would have a very hard time using them again. Ok, let me rephrase - I would not. Brian On Jul 12, 2023, at 6:14 AM, Jason Szumlanski via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:
|
_______________________________________________ List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
