We have about 20 units out in service. All of the batteries SOC readings have drifted apart greatly. IE always said not pay attention the battery readouts, and as long as voltage is even, that the batteries are working fine. After the last install we did of their batteries, their tech support group had me make up a cable to hook up a computer to the battery to re - set the BMS I believe. I’m scheduled with a new tech support channel for Iron Edison to take this on. Has anyone done this before , and is it really going to do any good ?
Jeremy Rodriguez Solar Installation / Design All Solar, Inc. 1453 M St. Penrose Colorado 81240 Sent by Jeremy's iPhone. Sorry for typos and shorthand. _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
