Hi Jay, if this is the LA AGM thin plate, I tried to look into this a few years ago. Being AGM, they have a recombination feature; when overcharged, they recombine the H2 O2, thus self-balancing, just like the top balance in LiFe. The caution is not to charge too fast in absorb mode. I decided not to use the balancer. The system is 3 yrs old and going great.
On Mon, May 15, 2023 at 2:38 PM Jay via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Hi All > > I’m wondering what the thoughts are on using or not balancers for 2 12v > lithium in series for 24v system. The batteries don’t have any series > communication. > Kilovault if that matters. > Not my design. > > It would seem to be a good idea, with victron having a good one. > > Thanks in advance > > Jay > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
