Hi all I’m just starting to try and figure out a failed enphase system that was just noticed to be off line a few days ago.
12 x IQ7A 400 watt panels The install is 20’ from the main transformer/load center. 1000 amp commercial panel There is no monitoring because they couldn’t get cat 5 to it and they won’t allow wifi as it’s on federal land. Ground mount Installed 5/21 Failed 10/22 240vac at the trunk cable connection points where the inverter connects All inverters show orange LED meaning no communication. All of the inverters don’t work. Does anyone have any ideas? I’m sort of stumped how all 12 inverters are broken? Thanks Jay _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
