Hey Mac, If you have rails beneath the module wouldn't it be easier to mount an inverter there with a bolt that fastens to rail? William's solution looks great, but I thought to ask because this would be cheaper and easier to wire.
Have a great day everyone 🌞 James B. Rudolph Independent Energy C-39784 ES #10816 NABCEP Certified PV Installer since 2009 #091209-155 C. 808.313.9701 On Thu, Feb 23, 2023 at 7:57 AM Mac Lewis via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Hello Wrenches, > > We are in the middle of planning for a full solar panel replacement at a > house with AC modules. It was a Solaria 355 with an Enphase IQ7+. Solaria > is going to replace the modules with a standard module, not an AC module > (MC4 cabling not an Q Cable to J-box). This seems OK but the issue is the > that microinverters don't have an integrated plate to mount to the existing > rail. > > I've talked with Enphase and it doesn't appear that they are willing to > sell us this mounting flange plate (or it could have been too unusual for > this particular tech support contact to deal with). Im sure I can fab up > something, but curious if anyone has dealt with this? Or has a good > contact at enphase that might be able to help with this unusual request. > > Thanks in advance! > > -- > > > > Mac Lewis > > *"Yo solo sé que no sé nada." -Sócrates* > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
