Thanks. That was the feedback we already received. I think it is SOP for Schneider to tell you to reinstall firmware and reset to factory - no matter what the problem. Fortunately, we have to go back to do some more wor - they are finally receiving their generator. That will give us a chance to recommission the system.
*Eric Smiley,* Project Manager e...@vecoop.ca T: 250.703.6004 <+12507036004> T: 888.386.0116 <+18883860116> *VIRIDIANENERGY.CA <https://viridianenergy.ca/>* * <https://viridianenergy.ca/>* On Tue, 6 Dec 2022 at 11:45, Tump via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > I have heard this too. Eric from SE has been cced here and the first thing > I was told to due was: Set inverter to bypass (someone needs to be on site, > as the inverter will shut off during reboot) Check & update firmware, RESET > ALL factory defaults and reenter your grid code. > If you find this a bit confusing, Tech support IS QUITE supportive. > > On Dec 5, 2022, at 11:52 AM, Eric Smiley via RE-wrenches < > re-wrenches@lists.re-wrenches.org> wrote: > > The inverter produces acceptable noise under no-load and at loads above 50 > W or so. > The noise (humming/buzzing) increases drastically at low power. So, > essentially it makes a lot of noise at night. > Has anyone else encountered this? We suspect it is the transformer > vibrating - some kind of resonance with the inverter enclosure. But it's > the first time we have encountered this. > > > *Eric Smiley,* Project Manager > e...@vecoop.ca > T: 250.703.6004 <+12507036004> > T: 888.386.0116 <+18883860116> > *VIRIDIANENERGY.CA <https://viridianenergy.ca/>* > > * <https://viridianenergy.ca/>* > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > > *tump3...@gmail.com <3...@gmail.com>* *www.SWNL.net* > Solarwinds Northernlights > * Serving Mid Coast Maine & Northern California* > * 207-832-7574 Cl. > 610-517-8401 * > *Blair "TUMP" May* > > > * ******** MAINE'S CHARTER ******** * * > NABCEP "Certified PV Installer"* > > > * ******** MAINE'S CHARTER ******** ** > Trace Xantrex "Certified" Dealer / Installer"* > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
