Wrenches, William I have installed quite a few memory saver kits in the old SW Inverters, ask around if there are any kits still around. This is a viable solution to the Li batteries. Here is something else, the BMS's should protect the batteries anyway, in part of my testing we did this using cheap chargers, overdriving the CC's good BMS's disconnected to protect the cells. Bringing back fun memories of mayhem and destruction,
On Thu, Oct 20, 2022, 9:51 AM William Miller via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Friends: > > > > This is a follow up on the question I asked about anyone having actual > experience integrating Simpliphi batteries with a Trace SW inverter > system. > > > > I read the battery and integration manuals carefully and spoke with > Simpliphi tech support. The systems are absolutely compatible but only if > the inverter and charge controllers are programmed correctly. > > > > Therein is the problem: If the SW inverters lose DC power, the > programming is erased and the inverters reset to factory defaults. These > default settings are not acceptable for safe operation of the Simpliphi > batteries. > > > > If the client is capable of determining when the settings have been reset > and can reprogram the inverters when needed, then maybe the design is > acceptable. In the case I am working on, the client does not have these > capabilities. It was decided to replace the dead batteries with the same > AGM style batteries currently in use, not the Simpliphi. > > > > Thanks for your input. > > > > William Miller > > > > Miller Solar > > 17395 Oak Road, Atascadero, CA 93422 > > 805-438-5600 > > www.millersolar.com > > CA Lic. 773985 > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
