Hi drake Can you give us a part number or picture?
Thx Jay > On Oct 6, 2022, at 7:33 AM, Drake Chamberlin via RE-wrenches > <re-wrenches@lists.re-wrenches.org> wrote: > > Our electrical supplier seamlessly transitioned from crimp on butt end > connectors, that were listed for CU and AL, to unmarked ones that were > approved for copper only. > > I became concerned since there was no marking. Calling two electrical > suppliers, the guys at the counter had to look up the device to learn that > they were listed for copper only. Talking to one of the counter guys, he > agreed that electricians were probably using these for aluminum. > > Since the barrels will be insulated, it is not likely that inspectors will > see them. The connectors are made of coated copper. I wonder how much of a > problem this will be. > > Drake > > > > > > -- > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
