Hello, Blake Gleason & All the Mechanix~ Travis Jordan astutely suggested "David Katz's single row system on 4" posts, it would tilt to vertical and only be one mod high in portrait."
Mick here: If the site would accommodate something as wide & low as what Travis described, you might ask Array Technologies if they can still furnish their DuraRack AT "adjustable tilt" mounts. These resemble their single axis Duratrack trackers, but without the automation electronics. Each one can mount 12 to 16 modules laid out like playing cards side by side. Seasonal tilt adjustment is handled by a geared down linear actuator which in turn is driven by a cordless drill. Maximum tilt is 60 degrees from horizontal; maybe that's steep enough or maybe not in Blake's extreme jobsite. I never had a suitable customer to match up with this solution, so I have no direct experience with it. It might be worth a phone call to Albuquerque 505.881.7567. As always, "The Wrench List is the Bomb!" Mick Abraham, Proprietor www.abrahamsolar.com Landline: 970-731-4675 Cell phone or for text messaging: 970-946-6584 ᐧ
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
