If you set up the inverter in a straight grid tie mode, does it still pass power through to the load terminals when on grid?
I ask this, because a client wants us to connect it with a backup load panel but no battery right now. He wants to add the battery later. My other thought is to install a bypass switch to pass grid power directly to the subpanel, which would act as a service bypass for the future anyway. Jason Szumlanski Florida Solar Design Group
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
