Wrenchers, We have a project on a large property, where the install site has no internet (there is internet much further away on the property, and on a different service) and cell reception is pretty bad. We attempted to use SMA Cell Modem Kits (sunny boy inverters), but couldn't get a good enough signal for them to work. The client was fine with having just a production meter with no internet based monitoring. Now there is the possibility of expanding the system quite a bit (also with Sunny Boy's), and I'd prefer to figure out a way to monitor everything from offsite. Has anyone had any success using a third party antenna with the SMA Cell Modem Kits? Or have thoughts on other methods for setting up monitoring where we could, at a minimum, see the combined output of all the inverters? Thanks for any thoughts. Adam
Adam Katzman (he/him) Autonomous Energies | Owner/Operator www.AutonomousEnergies.com <http://www.autonomousenergies.com> (518) 567-1468
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
