Not sure about the radians (I've rarely used them) but with the VFX series, that symptom can sometimes be avoided by programming a cool down period so that the inverters drop the generator while it is still running at full speed. Alternatively, by narrowing the generator voltage window at the bottom end, the inverters will potentially drop the generator connection before the voltage output gets too low as the generator shuts down. Hope this helps, Howie
*Howie Michaelson**Sun Catcher* *NABCEP Certified Solar PV Installer™* *Solar Electric Systems Sales & Service802-272-0004* On Fri, Feb 4, 2022 at 9:49 AM Eric Smiley <[email protected]> wrote: > I have an off grid system with three GS8048A inverters. > Every time it switches from generator charging to inverting - at the end > of absorption - the lights flicker and a propane boiler in the house goes > into fault. > I'm using Advanced AGS on the Mate3S. > > The loads don't exceed about 6 kW right now. > > Does anyone know if there's a way to reduce the transfer time? The > transition to charging is smooth. I don't understand why it's so clunky > transitioning back to inverting. > > > Eric Smiley > Project Manager, North Island > > E: [email protected] > T: 1-888-386-0116 ext 702 (toll free) > C: 250-703-6004 > W: viridianenergy.ca > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
