boB,
Interesting...Sounds like this is not a candidate for L-ion
batteries.
Bill
On 11/30/2021 10:47 PM, b...@midnitesolar.com wrote:
Hi Bill....
As I remember, the min is of course... Minimum time in Absorb.
Max is maximum time in absorb but depended on how long it took to get
from Bulk MPPT to that Absorb voltage.
So if it took 3 hours to get to Absorb that morning and you had t set
for Max 2 hours, it would Absorb for 2 hours.
If it only took 1 and 1/2 hours to reach Absorb voltage, the MX60
would Absorb for 1 and 1/2 hours.
It worked "OK" but these days I would probably just set it for min of
some 2 or 3 hours and then a max could be the same
time or longer for FLA batteries.
boB
On 11/30/2021 7:16 PM, frenergy wrote:
Yes, the old one, not the FM. This oldie had an interesting way to
set the absorption time. You would set the "min" time (in minutes)
and you would set the "max" time (in hours, you have to set it to
1,2,3 or 4 hours).
I need to know if I set the "min" to 10 minutes and the
"max" time to one hour or two or three or four, how long will it stay
in absorb?
I called Outback and Megan there didn't know how this old
fart works, apparently tech support isn't supporting us their old relics.
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
solar powered since 1982
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
