Jeremy; As far as I know, SMA, ABB and Ginlong have all ceased production
of their direct grid-tie wind inverters. You might talk to the folks at
Voltsys (https://www.voltsys.com/), I believe they make units into which
you can program the turbine's power curve, that produce a DC output
compatible with most solar inverters. I have not used them, but it's worth
a try.
Dan Fink
Owner, Buckville Energy Consulting LLC
IREC Certified Instructor for PV and Small Wind Installation
NABCEP Certified PV System Inspector
NABCEP PV Associate
d <dan.f...@greendustrialtraining.com>anbo...@gmail.com
970-672-4342




On Tue, Oct 12, 2021 at 2:15 PM Jeremy Coxon <jco...@sunwindpowerinc.com>
wrote:

> I have a customer that would like to convert an off grid system with
> batteries to straight grid tie w/o storage (grid power just became
> available).  So I’m hoping someone on this list might know of an option to
> convert a SWWP Whisper 200 (with controller) to grid tie operation?  I
> found a company in Africa that says they have a unit, but haven’t had any
> response.
>
> Best Regards,
> Jeremy Coxon NABCEP # 091308-21
> MWBE Certified
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to