G'day All, Apparently a new client that I picked up on an abandoned system attempted to EQ his batteries and he believes he accidentally put the master inverter into standby. This of course shut down his power to his home. The slave produced an F66 fault which is explained on page 39 of the operation manual. Now his issue is when he turns on both master and slave after about a minute or so all power goes off. He did try shutting off both 250A dc breakers as a type of reset but to no avail. The master will work fine as long as the slave is off.
I'm thinking this is something stupid easy. I'm looking for some ideas on what to look for or try. Thanks, in advance, Christopher- Chris Schaefer’s <http:www.solarandwindfx.com> *Tel/Fax 585-229-2083 or Cell 585-748-1870 * *5115 South Hill Road ~ Canandaigua New York 14424**www.solarandwindfx.com <http://www.solarandwindfx.com> ~ E-mail: ch...@solarandwindfx.com <ch...@solarandwindfx.com>* Thomas Jefferson, the author of our great Constitution, once said, "democracy" will cease to exist when you take away from those who are willing to work and give to those who would not."
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org