You may have alteady checked this but make sure AGS is enabled. I had that problem just this morning and after checking continuity of the wires again noticed that AGS was disabled.
John Blittersdorf On Tue, Sep 14, 2021 at 1:55 PM Michael Morningstar <mjmornings...@gmail.com> wrote: > Wrenches, > > I’ve got a Radian 8048/Mate 3S that no longer is activating the relay > responsible for generator starting. I’ve power cycled everything and > updated firmware. When I attempt to start the generator via the Mate 3S, > the relay does not close. > > Any suggestions before I look into replacing the relay/board? > > Which board do I order and what is the best source? > > Many thanks, > Michael > > > > > > *Michael **Morningstar* > > * Morningstar Electric* > PO Box 1494 > Mount Shasta, California 96067 > 530-921-0560 > CSLB 949635 > > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
