You can lower the output power of the charge controllers from 80 to 70-75 amps. You'll get clipping during full sun, but typically still works ok.
Mahalo, Roland Shackelford President / Owner Renewable Energy Services (RES), Inc. | www.renewablenergy.com | Mobile: 808-938-9239 | Office: 808-775-7410 | Fax: 808-775-7756 NABCEP Certified PV Installation Professional #091209-162 *Privileged And Confidential Communication. This electronic transmission, and any documents attached hereto, (a) are protected by the Electronic Privacy Act (18 USC ?? 2510-2521), (b) may contain confidential and/or legally privileged information, and (c) are for the sole use of the intended recipient named above. If you have received this electronic message in error, please notify the sender and delete the electronic message. Any disclosure, copying, distribution, or use of the contents of the information received in error is strictly prohibited. On Mon, Aug 16, 2021 at 2:03 PM jay <jay.pe...@gmail.com> wrote: > HI All, > > I’ve got a system with an outback FM-80 that is running at full power 48v. > > Its connected to a outback 80 twin pole GFDI breaker. > > The breaker is tripping due to running at 80 amps. > > Is the midnite MNDC-GFP100RT-2P the only option? > > thanks > > jay > > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
