Hello All,
I've now done several Blue Ion, both 48vdc and HV storage systems. Those with 
experience know that the 2.0 cabinet DC cabling comes out the back of the unit. 
In my 48v off-grid installs I've used DLO/RHW-2 into a wireway, making a DC bus 
with power distribution blocks, then to inverter, etc. I loop and support the 
cable from the back of the battery cabinet, allowing extra should I ever need 
to move it(it's on casters) to access the back for servicing.
The current BI 48v system I am building is commercial grid-tie and requires AHJ 
inspection. Is having RHW-2 cable in free air from the cabinet to a wireway 
NEC-legal (i.e. without conduit)? Obviously if conduit is needed, it eliminates 
looping and an easy roll of the cabinets away from a wall for service.

Thanks. I await the opinion of of the BI gurus of this forum. Found references 
on Mike Holt's forum to DLO/RHW-2 and conduit requirement, but no consensus one 
way or the other.


Kirk Herander / kirkh@vermont.solar [mailto:kirkh@vermont.solar]
Owner|Principal, VT Solar, LLC
Celebrating our 30th Anniversary 1991-2021!!
www.vermont.solar 
[https://nam02.safelinks.protection.outlook.com/?url=www.vermontsolarnow.com&data=02%7C01%7C%7C9f0330d75a244870112408d685311841%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636842843233477645&sdata=0NjyuKeQbEK6245SNnk8X4XnP9Q%2B%2BqtvcALkdDghvk4%3D&reserved=0]
dba Vermont Solar Engineering
802.863.1202
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to