I need some actual off-grid experience some of you wrenches may have had with with a (or 2) Radian(s) starting and running a 3HP, 230Volt, single phase, 3-wire submersible well pump.  It would be starting against a 50-100 foot static level in the well and a pressure in the pressure tank of 35psi.
            Yesterday I clamped a 2 HP well pump and during start up 
got an inrush current on a Fluke of 38 amps (both legs), which was 
against 200 feet of water column and 40psi in the tank. Unfortunately, I 
need a 3HP pump for this install.  I've read specs on all sorts of data 
sheets, running amps, max amps,locked rotor amps, but I need  real world 
knowledge.  What do we know?
Bill

Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to