William, We have done this by simply adding an additional Power module, the control stack is the same as an 8048a. However, as you mentioned Outback does not support this, and I don't be liee they would be supported under warranty after making this change.
Mahalo, Roland Shackelford NABCEP Certified PV Installation Professional #091209-162 President Renewable Energy Services (RES), Inc. | www.renewablenergy.com | Mobile: 808-938-9239 | Office: 808-775-7410 | Fax: 808-775-7756 *Privileged And Confidential Communication. This electronic transmission, and any documents attached hereto, (a) are protected by the Electronic Privacy Act (18 USC ?? 2510-2521), (b) may contain confidential and/or legally privileged information, and (c) are for the sole use of the intended recipient named above. If you have received this electronic message in error, please notify the sender and delete the electronic message. Any disclosure, copying, distribution, or use of the contents of the information received in error is strictly prohibited. On Wed, May 5, 2021 at 10:09 AM William Miller <will...@millersolar.com> wrote: > Wrenches: > > > > I have a system with 2 4048A Radians and I’d like to upgrade both of them > to 8 kW. I was told during the training this could be done but was not > supported. Has anyone tried this? > > > > I thought for sure this would have been covered in the archives but I > could not find it there. Hopefully we can answer this and put it in the > archives. > > > > Thanks in advance! > > > > William Miller > > > > Miller Solar > > 17395 Oak Road, Atascadero, CA 93422 > > 805-438-5600 > > www.millersolar.com > > CA Lic. 773985 > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
