Hello Wrenches, I have a customer with a very old (1995) Xantrex SW4024. He is trying to connect the two wire start to his generator. This unit has two sets of terminal blocks instead of the relay spade connectors I'm used to. Does anyone know or have an old manual that shows which ones to use? I know if I was on site I could just use my meter and figure it out, but it's a 3 hour drive.
Thanks in advance for your help -- Steve Romo Mountain Power Solutions LLC NABCEP certified PV Installer #110112-124 Kohler Certified Generator Technician Generac Certified Generator Technician 970-433-6316
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
