Does the 1.4.6 firmware also fix the mate 3S shutdown issue? One system I’ve got has the mate just blank except for a few minor displays. But no buttons work etc.
Unplug and replug and it’s all back to normal. Thanks Jay > On Mar 29, 2021, at 3:43 AM, Roland - RES <rol...@renewablenergy.com> wrote: > > Aloha Wayne, > > We too have been plagued by this issue, that has been extremely frustrating > for us and our clients. > > The newest 1.4.6 firmware is supposed to fix this issue. We have updated our > systems with this and so far so good. However because of the sometimes long > delays between the faults we can't be certain. > > Prior to this most common fix was replacing the mate. > > Also on FP2 we had a couple factory units have the hub jumpers set for the > wrong stacking. I believe they were set for parallel operations versus > series. Strange it would work fine with the jumpers either way for a long > time. But it's worth a check. > >> Sent from a IPhone, with touch screen keys on the fly. Please excuse >> shortcuts and typos. >> > Roland Shackelford > NABCEP CERTIFIED PV INSTALLER > President > Renewable Energy Services (RES), Inc. > Mobile: 808-938-9239 > www.renewablenergy.com > >>> On Mar 27, 2021, at 3:11 PM, Wayne Irwin <pureenergyso...@hotmail.com> >>> wrote: >>> >> >> Wrenches and Lones, >> >> We have had chronic inverter firmware mismatch issues with FLEXpower TWO FXR >> series on many systems. >> We've updated the firmware and replaced mates, yet the system failures >> continue. >> >> The systems will work flawlessly for months and then randomly show error and >> the firmware mismatch. Occasionally the system will discover (on its own) >> that the firmware is the same and turn back on. But usually, the "solution" >> is to unplug the mate and plug it back in and like magic...everything works >> again anywhere from 3 months to a year. >> >> This is disappointing and frustrating to the system owners as well as costly >> and time consuming for us. >> >> Any guidance in resolving this issue would be greatly appreciated. >> >> All these systems have been assembled by Outback. >> None of them have OpticsRE. >> >> >> Wayne Irwin >> President >> License #CVC56695 >> State Licensed Solar Contractor >> Pure Energy Solar International Inc. >> wa...@pureenergysolar.com >> PureEnergySolar.com >> SolarChargingStation.com >> 352 377-6527 Office >> 352 336-3299 Fax >> 352 316-1637 Cell >> >> The Sun Is Always Shining! >> >> The content of this message is Pure Energy Solar Confidential. If you are >> not the intended recipient and have received this message in error, any use >> or distribution is prohibited. Please notify me immediately by reply e-mail >> and delete this message from your computer system. Thank you. >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
