Emphase has a white paper showing production vs module size and locations around the country.
I don’t know if it’s more accurate than pv watts but you might check it out. Jay Peltz power. > On Mar 3, 2021, at 12:13 PM, Jason Szumlanski > <ja...@floridasolardesigngroup.com> wrote: > > > I'm wondering how accurate the DC to AC ratio is when using PVWATTS. I did a > quick PVWATTS analysis at my local area using a typical commercial roof tilt > and found that using a 420W module on an IQ7A versus a 385W module on an IQ7+ > yields almost identical results. The 420W module has 1% less annual > production at to the 145% ratio compared to the 132% ratio with the 385W > module. > > Given that, I can't imagine why anyone would use the IQ7A versus the IQ7+ on > a 208V system. Why incur the additional cost if the AC output current is > identical for both inverters? > > If PVWATTS is right, I guess it's a non-issue in my local area, but it may > vary in other locations where clipping is more common. The heat here results > in little clipping at a 132% ratio here, and I guess at 145% the morning and > afternoon advantages largely outweigh the mid-day clipping increase. > > Jason Szumlanski > > > > >> On Tue, Mar 2, 2021 at 10:00 AM Jason Szumlanski >> <ja...@floridasolardesigngroup.com> wrote: >> I was surprised to learn that the IQ7A is limited to 290 W continuous at 208 >> volts. That pretty much puts Enphase out of the running for light commercial >> jobs with new high-powered 72 cell panels. Any thoughts on this? >> >> Jason > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
