I dont think micros do only 120 volts though...Maybe a Schneider SW inverter? I recently was called to work on a DIY special that used a 4024 that was wired for 120V, including generator input.I also have a Magnum in my garage that does 120V quite well. I think it is their 2412?-GlennSent from my 'smart'phone, so please excuse typos and spelling errors.------ Original message------From: Lloyd HoffstatterDate: Thu, Jan 14, 2021 8:22 AMTo: RE-wrenches;Cc: Subject:Re: [RE-wrenches] 120v batteryless gT inverter
Jay, Suggest micros - minimal DC, less labeling, RSD compliant, simple tie-in. Best regards Lloyd Hoffstatter Sunstruck Consulting Get Outlook for iOS From: RE-wrenches > on behalf of Jay > Sent: Wednesday, January 13, 2021 3:36:10 PM To: RE-wrenches > Subject: [RE-wrenches] 120v batteryless gT inverter Hi all I’ve got someone looking for a 1500-2000 watt 120vac GT inverter Could be micro or sting. Any ideas? Thanks Jay Peltz power. _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
